A soy-based sealer and rejuvenator for driveways, parking lots and paths that are already paved. Spray it on, let it dry, and the gray, dried-out surface turns dark again while the top layer gets sealed up.
Illustration
Sun and weather bleach asphalt to a chalky gray. Asphalt Sealer soaks into the surface and returns it to a deep, even black.
It works into the surface instead of sitting on it as a paint-like film, helping keep out water, sun, road salt, and oil or fuel drips.
Made from soybeans rather than coal tar, and produced in America. We ship it factory direct from our facility in Dayton, Iowa.
Loose or packed recycled asphalt millings need our Asphalt Millings Sealer, which soaks deep into the millings and re-bonds them. Asphalt Sealer is for surfaces that are already paved.
Fill them with Crack Sealer first, then seal the whole surface.
Sweep or blow off dirt, leaves and loose stones. Pressure wash oil spots and let the pavement dry completely.
Fill cracks with Crack Sealer and let them set before you seal the surface.
Apply an even coat with our Bucket Sprayer, which hooks straight to the pail. Don't let it puddle. Pick a dry day with no rain in the forecast.
Let it dry fully before you walk or drive on it. Follow the drying time on the pail label.
Follow the directions on the pail label. Questions about your project? Call us at 515-517-2288.
A 5-gallon pail covers about 1,800 sq ft of asphalt. A 245-gallon tote covers about 85,000 sq ft.
Free shipping in the lower 48 states. Faster shipping and shipping to Hawaii, Alaska and Canada are calculated at checkout.
Go to the shopSend us a photo or call. We'll tell you which product to use and how much to order.
Contact Us