Measure Your Driveway
Start by measuring the length and width of the area you want to surface. Multiply to get total square footage. A typical two-car driveway is about 1,200 sq ft (20 ft wide x 60 ft long).
Calculate Millings Needed
At a standard depth of 3 inches, you will need approximately 1 ton of millings per 80 square feet. For a 1,200 sq ft driveway, that is about 15 tons of millings.
Millings prices vary by region, but expect to pay $10 to $25 per ton delivered, depending on distance from the source. Budget $150 to $375 for material.
Calculate HawkSeale Needed
HawkSeale Concentrate mixes 1 part product to 9 parts water. At that 1:9 dilution, one gallon of concentrate covers approximately 90 square feet of reclaimed asphalt millings (or 215 to 250 square feet on existing asphalt). For a 1,200 sq ft millings driveway you will need about 13 to 14 gallons of concentrate, or three 5-gallon pails.
At $299 per pail, that is $897 for the rejuvenator. Use our Product Calculator for an exact recommendation.
Total Cost Breakdown
- Millings: $150 to $375 (15 tons delivered)
- HawkSeale: $897 (three 5-gallon pails)
- Equipment rental: $150 to $300 (roller + sprayer for a weekend)
- Total: $1,200 to $1,575
Compare to Hot Mix Asphalt
A professionally paved 1,200 sq ft driveway using hot mix asphalt typically costs $4,000 to $8,000. That means millings plus HawkSeale saves you 60 to 80 percent while delivering a comparable finished surface.
Even hiring a contractor to grade, compact, and spray for you will keep total costs well under $3,000 for most residential driveways.